DLS2#sh run
Building configuration...

Current configuration : 4484 bytes
!
! Last configuration change at 04:29:32 UTC Mon Mar 1 1993
!
version 15.0
no service pad
service timestamps debug datetime msec
service timestamps log datetime msec
service password-encryption
!
hostname DLS2
!
boot-start-marker
boot-end-marker
!
enable secret 5 $1$7Acs$PqbwzdA6okagwyLp6iW9F0
!
no aaa new-model
system mtu routing 1500
vtp domain LAB_TEST
vtp mode transparent
ip routing
!
ip dhcp pool vlan_30_server
 network 10.10.30.0 255.255.255.0
 dns-server 200.200.200.1
!
!
ip dhcp snooping vlan 10,30
!
!
!
!
!
!
!
!
!
spanning-tree mode mst
spanning-tree extend system-id
!
spanning-tree mst configuration
 instance 1 vlan 10, 20
 instance 2 vlan 30, 199
!
spanning-tree mst 1 priority 28672
spanning-tree mst 2 priority 24576
!
vlan internal allocation policy ascending
!
vlan 10
 name client
!
vlan 20
 name voice
!
vlan 30
 name server
!
vlan 199
 name managment
!
vlan 777
 name native_vlan
!
vlan 900
 name parking_lot
!
!
!
!
!
!
!
!
!
!
!
!
!
!
interface Port-channel1
 switchport trunk encapsulation dot1q
 switchport trunk native vlan 777
 switchport trunk allowed vlan 10,20,30,199,777,900
 switchport mode trunk
!
interface Port-channel2
 switchport trunk encapsulation dot1q
 switchport trunk native vlan 777
 switchport trunk allowed vlan 10,20,30,199,777,900
 switchport mode trunk
!
interface Port-channel3
 no switchport
 ip address 10.10.12.2 255.255.255.252
!
interface FastEthernet0/1
 switchport access vlan 900
 shutdown
!
interface FastEthernet0/2
 switchport access vlan 900
 shutdown
!
interface FastEthernet0/3
 switchport access vlan 900
 shutdown
!
interface FastEthernet0/4
 switchport access vlan 900
 shutdown
!
interface FastEthernet0/5
 switchport access vlan 900
 shutdown
!
interface FastEthernet0/6
 switchport access vlan 900
 shutdown
!
interface FastEthernet0/7
 switchport trunk encapsulation dot1q
 switchport trunk native vlan 777
 switchport trunk allowed vlan 10,20,30,199,777,900
 switchport mode trunk
 channel-group 1 mode active
!
interface FastEthernet0/8
 switchport trunk encapsulation dot1q
 switchport trunk native vlan 777
 switchport trunk allowed vlan 10,20,30,199,777,900
 switchport mode trunk
 channel-group 1 mode active
!
interface FastEthernet0/9
 switchport trunk encapsulation dot1q
 switchport trunk native vlan 777
 switchport trunk allowed vlan 10,20,30,199,777,900
 switchport mode trunk
 channel-group 2 mode active
!
interface FastEthernet0/10
 switchport trunk encapsulation dot1q
 switchport trunk native vlan 777
 switchport trunk allowed vlan 10,20,30,199,777,900
 switchport mode trunk
 channel-group 2 mode active
!
interface FastEthernet0/11
 no switchport
 no ip address
 channel-group 3 mode on
!
interface FastEthernet0/12
 no switchport
 no ip address
 channel-group 3 mode on
!
interface FastEthernet0/13
 switchport access vlan 900
 shutdown
!
interface FastEthernet0/14
 switchport access vlan 900
 shutdown
!
interface FastEthernet0/15
 switchport access vlan 900
 shutdown
!
interface FastEthernet0/16
 switchport access vlan 900
 shutdown
!
interface FastEthernet0/17
 switchport access vlan 900
 shutdown
!
interface FastEthernet0/18
 switchport access vlan 900
 shutdown
!
interface FastEthernet0/19
 switchport access vlan 900
 shutdown
!
interface FastEthernet0/20
 switchport access vlan 900
 shutdown
!
interface FastEthernet0/21
 switchport access vlan 900
 shutdown
!
interface FastEthernet0/22
 switchport access vlan 900
 shutdown
!
interface FastEthernet0/23
 switchport access vlan 900
 shutdown
!
interface FastEthernet0/24
 switchport access vlan 900
 shutdown
!
interface GigabitEthernet0/1
 switchport access vlan 900
 shutdown
!
interface GigabitEthernet0/2
 switchport access vlan 900
 shutdown
!
interface Vlan1
 no ip address
!
interface Vlan10
 ip address 10.10.10.3 255.255.255.0
 standby 10 ip 10.10.10.1
 standby 10 preempt
!
interface Vlan20
 ip address 10.10.20.3 255.255.255.0
 standby 20 ip 10.10.20.1
 standby 20 preempt
!
interface Vlan30
 ip address 10.10.30.3 255.255.255.0
 standby 30 ip 10.10.30.1
 standby 30 priority 120
 standby 30 preempt
!
interface Vlan199
 ip address 10.10.199.3 255.255.255.0
 standby 199 ip 10.10.199.1
 standby 199 priority 120
 standby 199 preempt
!
router ospf 1
 router-id 2.2.2.2
 network 10.10.12.0 0.0.0.3 area 1
 network 10.10.0.0 0.0.255.255 area 1
!
ip http server
ip http secure-server
!
!
!
!
line con 0
 password 7 1511021F0725
 login
line vty 0 4
 password 7 01100F17580446
 login
line vty 5 15
 login
!
end

DLS2#sh ip int br
DLS2#sh ip int brief
Interface              IP-Address      OK? Method Status                Protocol
Vlan1                  unassigned      YES unset  up                    down
Vlan10                 10.10.10.3      YES manual up                    up
Vlan20                 10.10.20.3      YES manual up                    up
Vlan30                 10.10.30.3      YES manual up                    up
Vlan199                10.10.199.3     YES manual up                    up
FastEthernet0/1        unassigned      YES unset  administratively down down
FastEthernet0/2        unassigned      YES unset  administratively down down
FastEthernet0/3        unassigned      YES unset  administratively down down
FastEthernet0/4        unassigned      YES unset  administratively down down
FastEthernet0/5        unassigned      YES unset  administratively down down
FastEthernet0/6        unassigned      YES unset  administratively down down
FastEthernet0/7        unassigned      YES unset  up                    up
FastEthernet0/8        unassigned      YES unset  up                    up
FastEthernet0/9        unassigned      YES unset  up                    up
FastEthernet0/10       unassigned      YES unset  up                    up
FastEthernet0/11       unassigned      YES manual up                    up
FastEthernet0/12       unassigned      YES manual up                    up
FastEthernet0/13       unassigned      YES unset  administratively down down
FastEthernet0/14       unassigned      YES unset  administratively down down
FastEthernet0/15       unassigned      YES unset  administratively down down
FastEthernet0/16       unassigned      YES unset  administratively down down
FastEthernet0/17       unassigned      YES unset  administratively down down
FastEthernet0/18       unassigned      YES unset  administratively down down
FastEthernet0/19       unassigned      YES unset  administratively down down
FastEthernet0/20       unassigned      YES unset  administratively down down
FastEthernet0/21       unassigned      YES unset  administratively down down
FastEthernet0/22       unassigned      YES unset  administratively down down
FastEthernet0/23       unassigned      YES unset  administratively down down
FastEthernet0/24       unassigned      YES unset  administratively down down
GigabitEthernet0/1     unassigned      YES unset  administratively down down
GigabitEthernet0/2     unassigned      YES unset  administratively down down
Port-channel1          unassigned      YES unset  up                    up
Port-channel2          unassigned      YES unset  up                    up
Port-channel3          10.10.12.2      YES manual up                    up
DLS2#sh vlan
DLS2#sh vlan bri
DLS2#sh vlan brief

VLAN Name                             Status    Ports
---- -------------------------------- --------- -------------------------------
1    default                          active
10   client                           active
20   voice                            active
30   server                           active
199  managment                        active
777  native_vlan                      active
900  parking_lot                      active    Fa0/1, Fa0/2, Fa0/3, Fa0/4
                                                Fa0/5, Fa0/6, Fa0/13, Fa0/14
                                                Fa0/15, Fa0/16, Fa0/17, Fa0/18
                                                Fa0/19, Fa0/20, Fa0/21, Fa0/22
                                                Fa0/23, Fa0/24, Gi0/1, Gi0/2
1002 fddi-default                     act/unsup
1003 token-ring-default               act/unsup
1004 fddinet-default                  act/unsup
1005 trnet-default                    act/unsup
DLS2#sh vtp st
DLS2#sh vtp status
VTP Version capable             : 1 to 3
VTP version running             : 1
VTP Domain Name                 : LAB_TEST
VTP Pruning Mode                : Disabled
VTP Traps Generation            : Disabled
Device ID                       : 0016.c886.f280
Configuration last modified by 10.10.12.2 at 0-0-00 00:00:00

Feature VLAN:
--------------
VTP Operating Mode                : Transparent
Maximum VLANs supported locally   : 1005
Number of existing VLANs          : 11
Configuration Revision            : 0
MD5 digest                        : 0x21 0x83 0x0A 0x73 0x5E 0xFB 0xDB 0x27
                                    0x13 0x92 0xE6 0x9C 0xA2 0x94 0x11 0x32
DLS2#sh ether
DLS2#sh etherchannel sum
DLS2#sh etherchannel summary
Flags:  D - down        P - bundled in port-channel
        I - stand-alone s - suspended
        H - Hot-standby (LACP only)
        R - Layer3      S - Layer2
        U - in use      f - failed to allocate aggregator

        M - not in use, minimum links not met
        u - unsuitable for bundling
        w - waiting to be aggregated
        d - default port


Number of channel-groups in use: 3
Number of aggregators:           3

Group  Port-channel  Protocol    Ports
------+-------------+-----------+-----------------------------------------------
1      Po1(SU)         LACP      Fa0/7(P)    Fa0/8(P)
2      Po2(SU)         LACP      Fa0/9(P)    Fa0/10(P)
3      Po3(RU)          -        Fa0/11(P)   Fa0/12(P)

DLS2#sh sp
DLS2#sh spanning-tree r
DLS2#sh spanning-tree root

                                        Root    Hello Max Fwd
MST Instance           Root ID          Cost    Time  Age Dly  Root Port
---------------- -------------------- --------- ----- --- ---  ------------
MST0             32768 0016.c886.f280         0    2   20  15
MST1             24577 0024.5025.e500    200000    2   20  15  Po2
MST2             24578 0016.c886.f280         0    2   20  15
DLS2#
DLS2#sh st
DLS2#sh stand
DLS2#sh standby bri
DLS2#sh standby brief
                     P indicates configured to preempt.
                     |
Interface   Grp  Pri P State   Active          Standby         Virtual IP
Vl10        10   100 P Standby 10.10.10.2      local           10.10.10.1
Vl20        20   100 P Standby 10.10.20.2      local           10.10.20.1
Vl30        30   120 P Active  local           10.10.30.2      10.10.30.1
Vl199       199  120 P Active  local           10.10.199.2     10.10.199.1
DLS2#

Sending 5, 100-byte ICMP Echos to 10.10.10.1, timeout is 2 seconds:
!!!!!
Success rate is 100 percent (5/5), round-trip min/avg/max = 1/2/8 ms
Type escape sequence to abort.
Sending 5, 100-byte ICMP Echos to 10.10.10.2, timeout is 2 seconds:
!!!!!
Success rate is 100 percent (5/5), round-trip min/avg/max = 1/4/9 ms
Type escape sequence to abort.
Sending 5, 100-byte ICMP Echos to 10.10.10.3, timeout is 2 seconds:
!!!!!
Success rate is 100 percent (5/5), round-trip min/avg/max = 1/1/1 ms
Type escape sequence to abort.
Sending 5, 100-byte ICMP Echos to 10.10.20.1, timeout is 2 seconds:
!!!!!
Success rate is 100 percent (5/5), round-trip min/avg/max = 1/4/9 ms
Type escape sequence to abort.
Sending 5, 100-byte ICMP Echos to 10.10.20.2, timeout is 2 seconds:
!!!!!
Success rate is 100 percent (5/5), round-trip min/avg/max = 1/4/9 ms
Type escape sequence to abort.
Sending 5, 100-byte ICMP Echos to 10.10.20.3, timeout is 2 seconds:
!!!!!
Success rate is 100 percent (5/5), round-trip min/avg/max = 1/1/1 ms
Type escape sequence to abort.
Sending 5, 100-byte ICMP Echos to 10.10.199.1, timeout is 2 seconds:
!!!!!
Success rate is 100 percent (5/5), round-trip min/avg/max = 1/2/9 ms
Type escape sequence to abort.
Sending 5, 100-byte ICMP Echos to 10.10.199.2, timeout is 2 seconds:
!!!!!
Success rate is 100 percent (5/5), round-trip min/avg/max = 1/5/9 ms
Type escape sequence to abort.
Sending 5, 100-byte ICMP Echos to 10.10.199.3, timeout is 2 seconds:
!!!!!
Success rate is 100 percent (5/5), round-trip min/avg/max = 1/2/8 ms
Type escape sequence to abort.
Sending 5, 100-byte ICMP Echos to 10.10.199.4, timeout is 2 seconds:
!!!!!
Success rate is 100 percent (5/5), round-trip min/avg/max = 1/3/8 ms
Type escape sequence to abort.
Sending 5, 100-byte ICMP Echos to 10.10.199.5, timeout is 2 seconds:
!!!!!
Success rate is 100 percent (5/5), round-trip min/avg/max = 1/2/8 ms
Type escape sequence to abort.
Sending 5, 100-byte ICMP Echos to 10.10.12.1, timeout is 2 seconds:
!!!!!
Success rate is 100 percent (5/5), round-trip min/avg/max = 1/4/9 ms
Type escape sequence to abort.
Sending 5, 100-byte ICMP Echos to 10.10.12.2, timeout is 2 seconds:
!!!!!
Success rate is 100 percent (5/5), round-trip min/avg/max = 1/1/1 ms
Type escape sequence to abort.
Sending 5, 100-byte ICMP Echos to 10.10.10.11, timeout is 2 seconds:
.....
Success rate is 0 percent (0/5)
Type escape sequence to abort.
Sending 5, 100-byte ICMP Echos to 10.10.30.1, timeout is 2 seconds:
!!!!!
Success rate is 100 percent (5/5), round-trip min/avg/max = 1/2/8 ms
Type escape sequence to abort.
Sending 5, 100-byte ICMP Echos to 10.10.30.2, timeout is 2 seconds:
!!!!!
Success rate is 100 percent (5/5), round-trip min/avg/max = 1/8/25 ms
Type escape sequence to abort.
Sending 5, 100-byte ICMP Echos to 10.10.30.3, timeout is 2 seconds:
!!!!!
Success rate is 100 percent (5/5), round-trip min/avg/max = 1/2/9 ms
Type escape sequence to abort.
Sending 5, 100-byte ICMP Echos to 10.10.30.12, timeout is 2 seconds:
.....
Success rate is 0 percent (0/5)
DLS2(tcl)#
